SIGMA SHIELD (Exterior Weathershield Paint)
Product Description
Ordinary exterior emulsions cannot protect exterior walls from patches of dampness, algae, and fungus caused by rain. SIGMA SHIELD is especially formulated to give long lasting protection and beautiful looks
Features / Advantages
Allows breathing
100 % Acrylic latex based
Antifungal
UK pigment (not Chinese)
Coverage @ 120 to 130 sq. ft. / lit /coat
High Gloss – gives long-lasting sheen
Available in 2080 different shades
High penetrating power to substrate -covers hairline cracks
Waterproofing action
5 yrs warranty
Directions for use
Surface Preparation
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/ stiff coir brush, followed by water jetting if required. For areas severely affected by algae or fungus, application of Superbond Coat is recommended. Fill up all minor cracks and defects with Superbond , cement and sand mixture . Avoid application of putty or filling compound while painting an exterior
Priming
Application of putty is strictly not recommended. Apply one coat of Superbond along with white cement in the ration 1:1.5 or one coat of Sigma Exterior Acrylic Primer after thinning with water in the ratio of 1:0.5 by volume.
Finishing
Apply two coats of SIGMA SHIELD for normal, sound surfaces, with 4-6 hours between coats. 3 coats may be required in case of darker colours. For parapet walls and horizontal surface, minimum 3 coats is recommended for best performance
Thinning
Dilute 1 ltr of SIGMA SHIELD with 500 ml clean water for light shades and with 300 ml for dark shades. Stir thoroughly before use.
Safety Precautions
Store container in upright position, with lid tightly closed, in a cool, dry place
Keep out of reach of children and away from food, drink and animal feed
May be harmful if swallowed. In case of ingestion seek immediate medical attention.
Ensure good ventilation at all times.
Do not breathe vapor or spray. Avoid inhalation of dust by wearing suitable nose pad during sanding and surface preparation.
Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Remove splashes from skin with soap and water or a recognized skin cleanser.
Do not pour leftover paint down the drain or in water courses.
In the event of spills, contain spillage using sand or earth.
Safety Data Sheet available for professional user on request.
No added Lead, Mercury or Chromium compounds
Packing
20 Litre
