SIGMACOAT -WATER REPELLANT
Product Description
SIGMACOAT WR is specially formulated clear organic liquid which penetration in Concrete / Cementitious substrate & gives hydrophobic, durable , protective,UV resistant surface coating
Typical Applications
Cement painted surfaces, concrete, mortar, clay,brick surfaces etc
Corrugated AC sheet roofing water tanks facades & cladded surfaces, gypsum,boards clay & roofy tiles, paving block
Natural & artificial stone
Exterior of building requiring protection from rain moisture.
For injection grouting to arrest the rising dampness in wall.
Features / Advantages
Non staining clear coating does not effect the exterior decorative colour of building
Ready to use, does not require any further cement or any ingredient to add, so cost effective
Prevent efforescence & growth of algae & fungus hence building treated does not show sign of ageing.
Single coat Application only
Prevents entry of moisture into the walls but allows moisture to evaporate out. (It allows breathing to wall)
UV Resistant; Hydrostatic loading of dust on the surface is greatly reduced.
Technical Information
Appearance : Clear
Specific Gravity : 1.05 + 1
PH : Alkaline
Coverage : Approximately 2- 4 m2 [on brick wall] / Approximately 4-5 m2 [on plastered surface] .
Direction for use
Surface preparation is an important before application surface should be dry and free from all debris, dirt, oil ,grease, wax & all other contamination.
Apply single coat of SIGMACOAT WR by brush evenly on above surface.Allow the surface to dry for a minimum of 24hrs for best results.
Precautions
Do not dilute with water. Do not apply on wet surface.
Packing
20 Litre, 50 Litre.
